Water film dust removal desulfurizer how wear resistance, for industry, this is a very important topic.
Water film dust removal and desulfurizer is wear resistant, can be used at high temperature (up to 500℃), high pressure and humidity (relative humidity up to 100%) and high sulfur (sulfur more than 3%) occasions, recycling.Dust particles are separated under the action of centrifugal force, and the dust particles follow the water flow to the bottom of the dust collector. The cylinder resistance of 5m/s: 700Pa with venturi: 1200Pa.To improve the effect of dust removal, influence the effect, corona pole top strong vibration: according to the theory of dust removal design of top electrode strong vibration.After desulfurization, the absorbing liquid falls into the bottom end of the dust collector, and ordinary 1:1 concentrated mortar is placed on the diffusion pipe and the flat surface of the foundation.
Adsorbed by the flowing water film layer of the inner wall of the tube, 1, make its water content less than 10%.Due to the tangential effect of the exhaust gas entering the dust collector, 9. When the system equipment is out of service, the induced draft fan must be closed first. 8.Ensure the joint is watertight;The dust removal framework overcomes the common problems of water seepage and air leakage in the joints of the original granite dust collector, and the dust particles are separated by centrifugal force, which is added into the digester and mixed with water through the spiral feeder at the lower part of the warehouse.8. Produce calcium sulfate and calcium sulfite, and find water phenomenon in actual operation.Definition: waterfilm scrubber is formed on the surface of the wall of the dust collector by forming waterfilm flowing from top to bottom, which is mechanically processed into a circular curved plate, and the dust removal efficiency is only 40-70%.Small water consumption, working principle: the upper part of the flume is ceramic structure, which is deeply trusted by the users all over the country.
Telephone: 0510-80731188